已发表的英文期刊论文

[84] Qingjun Jin, Yang Hu, Jie Shen, Botian Li, Chengyou Kan, A Novel 1, 8-Naphthalimide Green Fluorescent Dye and Its Corresponding Intrinsically Fluorescent Polyurethane Latexes. Journal of Coatings Technology and Research, 2016, Accepted

[83] Jin, Q.J., Li, B.T., Zhang, H., Li, L.X., Shen, J., Kan, C.Y., Investigation of covalently coloerd polyurethane latexes based on novel anthraquinone polyurethan chain extenders. Journal of Macromolecular Science-Pure & Applied Chemistry, 2016, Accepted

[82] Hu, Y., Yu, C.J., Zhang. H., Wang,J.S., Jiang, G.Q., Kan, C.Y., The pH-triggered drug release of monodispersed P(St-co-DMAEMA) nanoparticles: Effects of swelling, polymer chain flexibility and drug-polymer interactions. Journal of Nanoscience and Nanotechnology, 2016, Accepted

[81] Shen, J., Xu, J., Hu, Y., Sun, J.W., Li, L.X., Kan, C.Y., Investigation of Cationic Soapless P(St-co-DMAEMA) Latex and Its Electrostatic Adsorption of Laponite. Chinese Journal of Polymer Science, 2016, 34(10): 1240-1250

[80] Hu, Y., Shen, B.Y., Li, B.T., Xu, M., Jiang, G.Q., Kan, C.Y., Preparation and Property of a Novel Polymerizable Amphiphilic Anthraquinone Derivative and Its Cationic Colored Copolymer Latexes. RSC Advances, 2016, 6: 37765-37772

[79] Hu, Y., Lin, R., Patel, K., Kan, C.Y., Cui, H.G., Spatiotemporal Control of the Creation and Immolation of Peptide Assemblies. Coordination Chemistry Reviews, 2016, 320-321: 2-17

[78] Hu, Y., Lin, R., Zhang, P.C., Fern, J., Cheetham, A. G., Patel, K., Schulman, R., Kan, C.Y., Cui, H.G., Electrostatics-Driven Lamination and Untwisting of β-Sheet Assemblies. ACS Nano, 2016, 10: 880-888

[77] Hu, Y., Yu, C.J., Zhang, H., Wang, L.H., Jiang, G.Q., Kan, C.Y., Monodispersed P(St-co-DMAEMA) nanoparticles as pH-sensitive drug delivery system: synthesis, characterization and release behaviors. Nanomedicine: Nanotechnology, biology and medicine (sup), 2016, 12(2): 524-525

[76] Zhang, H., Huang, X.Y., Shen, J., Kan, C.Y., Preparation and characterization of nanoencapsulated avermectin with biodegrdable polyurethane. Nanomedicine: Nanotechnology, biology and medicine (sup), 2016, 12(2): 543-544

[75] Huang, X.Y., Li, L.X., Xu, M., Xu, J., Jiang, Y. M., Kan, C.Y., Self film-forming and opaque hollow latexes fabricated via seeded emulsion polymerization followed by alkali post-treatment. Journal of Applied Polymer Science, 2015, 132(37): 42541-42553

[74] Hou Z.S., Kan C.Y.,Polysiloxanes with Quaternary Ammonium and Polyether Groups for SPPO Waterborne Emulsions. Journal of Surfactant and Detergents, 2015, 18(3): 517-522

[73] Wang, J.S., Li. B.T., Jin, Q.J., Ning, B., Huang, X.Y., Kan, C.Y., Preparation of covalently colored polymer latex through minemulsion polymerization based on a polymerizable dye. Designed Monomers and Polymers, 2015, 18(7): 611-619

[72] Hou, Z.S., Kan, C.Y., Polysiloxanes with quaternary ammonium groups for SPPO aqueous emulsions. Journal of Surfactants and Detergents, 2015,18(3): 517-522

[71] Hou, Z.S., Xia, Y.R., Qu, W.Q., Kan, C.Y. Preparation and properties of thermoplastic expandable microspheres with P(VDC-AN-MMA) shell by suspension polymerization. International Journal of Polymeric Materials and Polymeric Biomaterials, 2015, 64(8): 427-431

[70] Cheng, G.Z., Huang, X.Y., Zhang, H., Hu, Y., Kan, C.Y., Preparation of P(St-co-MAA)/CeO2 microspheres and their application. RSC Advances, 2014, 4(55): 29042-29049

[69] Deng, W., Guo, H. C., Zhang, W.N., Kan, C.Y., Fabrication of hollow particles by altering core size. Colloid & Polymer Science, 2014, 292(10): 2687-2694

[68] Hu, Y., Cheng G.Z., Wang J.S., Jiang G.Q., Kan C.Y., Preparation and characterization of cationic pH-sensitive SiO2/polymer core-shell nanoparticles with amino groups. Colloid & Polymer Science, 2014, 292(10): 2611-2620

[67] Hu, Y., Wang J.S., Zhang H., Jiang G.Q., Kan C.Y., Synthesis and characterization of monodispersed P(St-co-DMAEMA) nanoparticles as pH-sensitive drug delivery system. Materials Science & Engineering. C, Materials for Biological Applications, 2014, 45: 1-7

[66] Hu, Y., Wang, J.S., Cheng, G.Z., Shen, J., Kan, C.Y., Fabrication and Characterization of Sulfonate-containing Polystyrene/CaCO3 Core-shell Nanoparticles. Chinese Journal of Chemistry, 2014, 32(7): 579-584

[65] Hou, Z.S., Kan, C.Y., Preparation and properties of thermoexpandable polymeric microspheres. Chinese Chemical Letters，2014, 25: 1279-1281

[64] Wang, J.S., Hu, Y., Shen, J., Huang, X.Y., Kan, C.Y., A novel approach to prepare core/shell polymer particles with highly sulphonate content. Chinese Journal of Polymer Science, 2014, 32(5): 519-523

[63] Jiang, Y.M., Li, B.T., Wang, W.J., Xu, M., Kan, C.Y., Effect of the shell crosslinking level and core/shell ratio on the morphology of latex particles in the preparation of hollow latexes. Chinese Journal of Polymer Science, 2014, 32(2): 177-186.

[62] Jiang, Y.M., Li, B.T., Deng W., Li, X.Y., Kan, C.Y., Effect of monomer feeding mode on the preparation of hollow latexes with high MAA content in the core latex preparation. Chinese Journal of Polymer Science, 2014, 32(1): 21-28.

[61] Li, B.T., Shen, J., Jiang, Y. M., Wang, J. S., Kan, C. Y., Preparation and properties of covalently colored polymer latex based on a new anthraquinone monomer. Journal of Applied Polymer Science, 2013, 129(3): 1484-1490

[60] Lan, R., Wang, G. D., Yang, L., Wang, T. J., Kan, C. Y. ,and Jin, Y., Prediction of release characteristics of film-coated urea from structure characterization data of the film. Chemical Engineering & Technology, 2013, 36(2): 347-354.

[59] Deng, W., Ji, W. J., Jiang, Y. M., Kan, C. Y., Influence of unsaturated acid monomer on the morphology of latex particles in the preparation of hollow latex via the alkali post-treatment. Journal of Applied Polymer Science, 2013. 127(1): 651-658.

[58] Orozco, J., Cheng, W.Z., Vilela,D., Sattayasamitsathit,S., Vazquez-Duhalt,R., Valds-Ramrez,G., Pak,O.S., Escarpa,A., Kan,C.Y., Wang, J., Micromotor-based high-yielding fast oxidative detoxification of chemical threats. Angewandte Chemie (International ed. in English), 2013, 52(50): 13276-13279

[57] Li, B. T., Shen, J., Liang, R. B., Ji, W. J., Kan, C. Y., Synthesis and characterization of covalently colored polymer latex based on new polymerizable anthraquinone dyes. Colloid and Polymer Science, 2012, 290(18): 1893-1900.

[56] Li, B. T., Shen, J., Ji, W. J., Cheng, G. Z., Kan, C. Y., Preparation of Covalently-colored Polymer Latex via Batch Emulsion Polymerization. Chinese Journal of Chemistry, 2012. 30(10): 2338-2342.

[55] Ji, W. J., Jiang, Y. M., Li, B. T., Deng, W., Kan, C. Y., Design and control of soap-free hydrophilic-hydrophobic core-shell latex particles with high carboxyl content in the core of the particles. Chinese Journal of Polymer Science, 2012. 30(4): 595-602.

[54] Wang, J. S., Chen, Y. S., Deng, W. ,and Kan, C. Y., Preparation of sulphonate-containing polymer particles via semi-continuous emulsion copolymerizaion of styrene and sodium styrene sulphonate. Chinese Journal of Polymer Science, 2011. 29(1): 111-116.

[53] Lan, R., Liu, Y. H., Wang, G. D., Wang, T. J., Kan, C. Y. , Jin, Y., Experimental modeling of polymer latex spray coating for producing controlled-release urea. Particuology, 2011. 9(5): 510-516.

[52] Jia, L. K., Gong, L. X., Ji, W. J., Kan, C. Y., Synthesis of vegetable oil based polyol with cottonseed oil and sorbitol derived from natural source. Chinese Chemical Letters, 2011. 22(11): 1289-1292.

[51] Deng, W., Zhang, M. J., Ji, W. J., Kan, C. Y., Polar Gradient Latex Particles with Hydrophilic Core and Hydrophobic Shell Prepared via Multistep Emulsion Polymerization. Chinese Journal of Chemistry, 2011. 29(4): 853-856.

[50] Wu,X., Jia, L.K., Kan, C.Y., Preparation of crosslinked soy protein-polyurethane composite latexes. Chinese Synthetic Rubber Industry, ,2011,01:73

[49] Wang, J. S., Deng, W., Chen, Y. S., Kan, C. Y., Preparation of sulphonate-containing core/shell latex particles via seeded emulsion copolymerization. Chinese Chemical Letters, 2010. 21(10): 1259-1262.

[48] Deng, W., Wang, M. Y., Chen, G., Kan, C. Y., Morphological evolution of multistage polymer particles in the alkali post-treatment. European Polymer Journal, 2010. 46(6): 1210-1215.

[47] Deng, W., Wang, J. S. A., Wang, M. Y., Kan, C. Y., Preparation of Bowl-Like Polymer Particles via Multi-Step Emulsion Polymerization and Alkali Post-Treatment. Polymers and Organic Chemistry, 2010. 297: 61-64.

[46] Deng, W., Li, R. L., Zhang, M. J., Gong, L. X., Kan, C. Y., Influences of MAA on the porous morphology of P(St-MAA) latex particles produced by batch soap-free emulsion polymerization followed by stepwise alkali/acid post-treatment. Journal of Colloid and Interface Science, 2010. 349(1): 122-126.

[45] Chen, Y. S., Wang, J. S., Hou, Z. S., Kan, C. Y., Preparation of polymeric microspheres with high content of sulphonate groups. Chinese Chemical Letters, 2010. 21(2): 234-236.

[44] Chen, Y. S., Wang, J. S., Hou, Z. S., Kan, C. Y., Preparation of polymeric latex with high sulphonate content. Chinese Synthetic Rubber Industry, 2009. 05:421.

[43] Li, R. L., Kan, C. Y., Li, Z. P., Du, Y., Cui, Y. N., Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment. Chinese Chemical Letters, 2007. 18(6): 741-743.

[42] Cui, Y. N., Hou, Z. S., Li, R. L., Kan, C. Y., POLY 181-Preparation of porous P(MMA-EGDMA) particles by seeded two-step swelling method. Abstracts of Papers of the American Chemical Society, 2007. 234.

[41] Zhao, Z. Q., Li, Z. P. ,and Kan, C. Y., Synthesis of polydimethylhydrosiloxanes via telomeric reaction and their characterization. Abstracts of Papers of the American Chemical Society, 2006. 231.

[40] Xie, W., Kan, C. Y., Liu, D. S., Synthesis and characterization of a novel acrylate derived from 2,4-toluene diisocyanate and its copolymerization with unsaturated monomers. Abstracts of Papers of the American Chemical Society, 2006. 231.

[39] Weng, L. B., Kan, C. Y., Kang, K., Li, R. L., Cui, Y. N., Du, Y., POLY 99-Monodisperserd soap-free polymer latex particles and trypsin immobilization on them. Abstracts of Papers of the American Chemical Society, 2006. 232.

[38] Li, R. L., Kan, C. Y., Du, Y., Li, Z. P., Influences of electrolytes on the soap-free emulsion copolymerization of St-MMA-AA. Chinese Chemical Letters, 2006. 17(11): 1503-1506.

[37] Kang, K., Kan, C. Y., Yeung, A., Liu, D. S., The immobilization of trypsin on soap-free P(MMA-EA-AA) latex particles. Materials Science & Engineering C-Biomimetic and Supramolecular Systems, 2006. 26(4): 664-669.

[36] Kang, K., Kan, C. Y., Du, Y., Liu, D. S., Yeung, A., Immobilization of aminoglycosidic aminocyclitols antibiotic onto soap-free poly(MMA-EA-AA) latex particles. Journal of Biomaterials Science-Polymer Edition, 2006. 17(1-2): 91-101.

[35] Kang, K., Kan, C. Y., Du, Y., Liu, D. S., Influences of the polymerization ingredients on the porous morphology of soap-free poly(methyl methacrylate/ethyl acrylate/methacrylic adid) seeded latex particles. Journal of Applied Polymer Science, 2006. 99(4): 1934-1939.

[34] Kang, K., Kan, C. Y., Du, Y., Liu, D. S., Study on soap-free P(MMA-EA-AA or MAA) latex particles with narrow size distribution. Polymers for Advanced Technologies, 2006. 17(3): 193-198.

[33] Kang, K., Kan, C. Y., Du, Y., Liu, D. S., The generation of void morphology inside soap-free P(MMA-EA-MAA) particles prepared by seeded emulsion polymerization. Journal of Colloid and Interface Science, 2006. 297(2): 505-512.

[32] Chen, Y. S., Kan, C. Y., Du, Y., Huang, S. M., POLY 160-Study on sulphonate-containing functional latex particles. Abstracts of Papers of the American Chemical Society, 2006. 232.

[31] Li, Y. J., Kan, C. Y., Huang, S. M., Effect of MAA concentration on the preparation of micron-size P (St-MAA) particles. Abstracts of Papers of the American Chemical Society, 2005. 230: p. U4101-U4102.

[30] Li, Y. J., Huang, S. M., Kan, C. Y., Preparation of micro monodispersed P(St-MAA) microspheres in isopropanol-water medium. Chinese Synthetic Rubber Industry, 2005. 04: 310.

[29] Kang, K., Kan, C. Y., Yeung, A., Liu, D. S., The properties of covalently immobilized trypsin on soap-free P(MMA-EA-AA) latex particles. Macromolecular Bioscience, 2005. 5(4): 344-351.

[28] Kang, K., Kan, C. Y., Du, Y., Yeung, A., Liu, D. S., Morphology control of soap-free seeded P(St-EA-AA) latex particles. European Polymer Journal, 2005. 41(7): 1510-1518.

[27] Kang, K., Kan, C. Y., Du, Y., Liu, D. S., Synthesis and properties of soap-free poly(methyl methacrylate-ethyl acrylate-methacrylic acid) latex particles prepared by seeded emulsion polymerization. European Polymer Journal, 2005. 41(3): 439-445.

[26] Kang, K., Kan, C. Y., Du, Y., Liu, D. S., Synthesis of micron-sized multihollow soap-free P(St-EA-AA) latex particles. Abstracts of Papers of the American Chemical Society, 2005. 230: p. U4105-U4106.

[25] Kang, K., Kan, C. Y., Du, Y., Liu, D. S., Influences of acid post-treatment on the morphology of soap-free P(MMA-EA-MAA) particles prepared by seeded emulsion polymerization. Chinese Journal of Polymer Science, 2005. 23(5): 479-485.

[24] Kang, K., Kan, C. Y., Du, Y., Li, Y. Z., Liu, D. S., A new kind of void soap-free P(MMA-EA-MAA) latex particles. Chinese Chemical Letters, 2005. 16(6): p. 831-834.

[23] Wang, J. X., Kan, C. Y. ,and Liu, D. S., Synthesis of novel monomeric dyes with anthraquinone residue. Chinese Chemical Letters, 2004. 15(10): 1161-1163.

[22] Kang, K., Kan, C. Y., Xiong, Q., Du, Y. ,and Liu, D. S., Preparation and characterization of microsized functional P(CMMA CAA) latex particles. Abstracts of Papers of the American Chemical Society, 2004. 227: p. U381-U381.

[21] Kang, K., Kan, C. Y., Du, Y., Liu, D. S., Control of particle size and carboxyl group distribution in soap-free emulsion copolymerization of methyl methacrylate-ethyl acrylate-acrylic acid. Journal of Applied Polymer Science, 2004. 92(1): 433-438.

[20] Kang, K., Kan, C. Y., Du, Y., Liu, D. S., Effects of alkali post-treatment on the particle morphology of soap-free poly(methyl methacrylate-ethyl acrylate-acrylic acid) latices. Polymers for Advanced Technologies, 2004. 15(11): 676-682.

[19] Quan, Y., Yang, M. S., Yan, Q., Jin, R. G., Kan, C. Y., Liu, D. S., Studies on reinforcing and toughening of nano-composite on RPVC. Abstracts of Papers of the American Chemical Society, 2003. 226: p. U494-U494.

[18] Li, H. P., Kan, C. Y., Du, Y., Liu, D. S., Morphology of P(BA-St-DAAM) latex particles prepared by seeded-emulsion polymerization. Polymers for Advanced Technologies, 2003. 14(3-5): p. 212-215.

[17] Wang, J. X., Kan, C. Y., Liu, D. S., Preparation and characterization of yellowish polyacrylate latex. Abstracts of Papers of the American Chemical Society, 2002. 223: p. D10-D10.

[16] Tu, G. L., Kan, C. Y., Li, Y. Z., Liu, D. S., Preparation of monodispersed poly(styrene-methyl methacrylate-acrylic acid) latexes. Abstracts of Papers of the American Chemical Society, 2002. 224: p. U377-U377.

[15] Li, H. P., Kan, C. Y., Du, Y., Liu, D. S., Effect of the amount of diacetone acrylamide on the properties of styrene-acrylic copolymer latexes and their films. Abstracts of Papers of the American Chemical Society, 2002. 223: p. C112-C112.

[14] Kan, C. Y., Zhao, P. Z., Du, Y., Liu, D. S., Influence of alkal/acid treatment conditions on the generation of nanosize pores inside poly(styrene-ethyl acrylate-acrylic acid) latex particles. Abstracts of Papers of the American Chemical Society, 2002. 223: p. C112-C113.

[13] Kan, C. Y., Kong, X. Z., Du, C. M., Liu, D., Catalytic Behavior of crosslinked polystyrene bound platinum complex in hydrosilylation of olefins. Polymer Journal, 2002. 34(3): 97-102.

[12] Kan, C. Y., Zhao, P. Z., Liu, D. S., Effect of posttreatment temperature on the formation of multihollow P(St-EA-AA) latex particles. Abstracts of Papers of the American Chemical Society, 2001. 222: p. U253-U253.

[11] Kan, C. Y., Liu, D. S., Kong, X. Z., Zhu, X. L., Study on the preparation and properties of styrene-butyl acrylate-silicone copolymer latices. Journal of Applied Polymer Science, 2001. 82(13): 3194-3200.

[10] Kan, C. Y., Kong, X. Z., Yuan, Q., Liu, D. S., Morphological prediction and its application to the synthesis of polyacrylate/polysiloxane core/shell latex particles. Journal of Applied Polymer Science, 2001. 80(12): 2251-2258.

[9] Kan, C. Y., Kong, X. Z., Liu, D. S., Core-shell morphology prediction via interfacial energy estimation and its application to polyacrylates-polysiloxane latex particles. Abstracts of Papers of the American Chemical Society, 2000. 220: p. U253-U253.

[8]  Kan, C. Y., Kong, X. Z., Liu, D. H., Poly(styrene-divinylbenzene) bound platinum complex in hydrosilylation of unsaturated hydrocarbons. Abstracts of Papers of the American Chemical Society, 2000. 220: p. U274-U274.

[7]  Yang, Y., Kong, X. Z., Kan, C. Y., Sun, C. G., Encapsulation of calcium carbonate by styrene polymerization. Polymers for Advanced Technologies, 1999. 10(1-2): 54-59.

[6]  Kong, X. Z., Kan, C. Y., Li, H. H., Yu, D. Q., Yuan, Q., Synthesis and characterization of hollow polymer latex particles. Polymers for Advanced Technologies, 1997. 8(11):  627-630.

[5]  Kan, C. Y., Zhu, X. L., Yuan, Q., Kong, X. Z., Graft emulsion copolymerization of acrylates and siloxane. Polymers for Advanced Technologies, 1997. 8(11): 631-633.

[4]  Kan, C. Y., Li, H. H., Yuan, Q., Kong, X. Z., Preparation of porous latex particles by emulsion polymerization. Korea Polymer Journal, 1997. 5(4):  221-227.

[3]  Kong, X. Z., Kan, C. Y., Yuan, Q., Preparation of polyacrylate-polysiloxane core-shell latex particles. Polymers for Advanced Technologies, 1996. 7(12): 888-890.

[2]  Kan, C. Y., Yuan, Q., Wang, M. C. ,and Kong, X. Z., Synthesis of silicone-acrylate copolymer latexes and their film properties. Polymers for Advanced Technologies, 1996. 7(2): 95-97.

[1]  Kan, C. Y., Yuan, Q., Luo, A. G., Kong, X. Z., Preparation of styrene-divinyl benzene copolymer-supported platinum complexes and their catalytic properties in hydrosilylation. Polymers for Advanced Technologies, 1996. 7(2): 76-78.